16
2.3 Preparation
2.3.1 Setting-up 1: Loading the Battery Cartridge
Before starting the BHT-5000, be sure to load the battery cartridge (sold separately)
according to the steps below.
(1)
For the Ni-MH battery cartridge: Charge the battery cartridge, referring to Section
5.5, "Charging the Ni-MH Battery Cartridge (using the CU-5001)."
For the dry battery cartridge: Load two LR6 batteries into the cartridge, referring
to the "User's Manual of Dry Battery Cartridge" contained in the battery cartridge
package.
(2)
Turn the BHT-5000 upside down.
(3)
Push the battery cartridge into the BHT-5000 until it clicks into place. (To remove
the battery cartridge, press the release button.)
Release button
Battery cartridge
CAUTION
• Do not use batteries or power sources other
than the specified ones; doing so could gener-
ate heat or cause malfunction.
WARNING
• Never disassemble or heat the battery cartridge,
nor put it into fire or water; doing so could
cause battery-rupture or leakage of battery fluid,
resulting in a fire or bodily injury.
• Do not carry or store the battery cartridge to-
gether with metallic ball-point pens, necklaces,
coins, hairpins, etc.
Doing so could short-circuit the terminal pins,
causing the batteries to rupture or the battery
fluid to leak, resulting in a fire or bodily injury.
• Avoid dropping the battery cartridge or letting
it undergo any shock or impact.
Doing so could cause the batteries to break,
generate heat, rupture or burn.
• Never charge the Ni-MH battery cartridge where
any inflammable gases may be emitted; doing
so could cause fire.
