27
Chapter 2. Getting Started the BHT-5000 and System Mode
The function selected is reverse-displayed (white-on-black) with the cursor. To select a
desired item in System Mode, press the corresponding numerical key and then press
ENT key.
The following keys have the same functions as listed below after the screen has shifted
to the selected next screen:
Numerical keys
Pressing a numerical key corresponding with a desired
menu number selects the desired item displayed on the
screen.
ENT key
Pressing this key registers the selected item and executes
the corresponding function.
Pressing
and
keys ( F5 and F6 keys) moves the
cursor up and down, respectively, to select a desired
item.
Pressing
and
keys ( F7 and F8 keys) moves the
cursor to the left and right, respectively, to select a de-
sired setting.
The C key is inoperative on the SYSTEM MENU. On other screens, pressing C key
returns to the immediately preceding screen.
The power-on default is "Execute Program" which is reverse-displayed. Once any
other item is selected, the selected item will be reversed with the cursor when you turn
back to the SYSTEM MENU.
2.4 Operating in System Mode
System Mode is an operating software exclusively designed for the effective use of the
BHT-5000, which includes various functions as shown on the next page.
2.4.1 Starting System Mode
To start up System Mode, power on the BHT-5000 while holding down SF and 1
keys. This operation calls up the SYSTEM MENU on the LCD as shown below.
SYSTEM MENU
1:Execute Program
2:Download
3:Upload
4:Set System
5:Test
6:Version
and
keys on
the 32-key pad
( F5 and F6 keys
on the 26-key pad)
and
keys on
the 32-key pad
( F7 and F8 keys on
the 26-key pad)
