114
[ 1 ] Fully Discharging (Refresh) and then Charging
(1)
Power on the CU-5001. The POWER LED comes on.
(2)
Load a Ni-MH battery cartridge into the CU-5001 from the battery cartridge slot.
The CU-5001 flashes the CHG2 LED at 0.4-second intervals and starts discharging
the cartridge. The discharging time differs depending upon the battery condition,
but never more than two hours.
Upon completion of discharging, the CHG2 LED comes to stay on and the CU-
5001 starts charging.
After approx. ten hours of charging, the CHG2 LED starts flashing at 2-second
intervals, indicating that the charging is completed.
(3)
Press the battery ejection button to take out the battery cartridge.
■
Discharging & Charging Operations and LED Indication
DATA
CHG1
CHG2
POWER
DATA
CHG1
CHG2
POWER
DATA
CHG1
CHG2
POWER
DATA
CHG1
CHG2
POWER
DATA
CHG1
CHG2
POWER
⇒
⇒
⇒
Operator’s
Action
Power on
the CU-5001.
Load a battery
cartridge into
the CU-5001.
(After
discharging)
(After approx.
10 hours)
Take out the
battery
cartridge.
LED
Indication
ON
ON
ON
ON
ON
OFF
ON
CU-5001
Status
On standby
Discharging
Ordinary
charging
Trickle
charging
On standby
⇒
⇒
⇒
⇒
⇒
Flashing
at 0.4-
second
intervals
Flashing
at 2-
second
intervals
