Denso BHT-1260BWB-CE, User Manual

Page: 227 / 251

215
Barcode Handy Terminal/2D code Handy Terminal
Message BHT Response Cause Countermeasure
The screen on the left is
displayed when the power
is turned ON.
−
Note
−
Refer to Chapter 4, 4.4.3 -
[10] Startup Config to stop
displaying the message.
Default settings displays
the message.
The backup battery
discharge counter has
exceeded the specified
number of times and the
battery power level has
dropped below the
specified level. Replace the backup
battery.
Refer to Chapter 6
Maintenance.
The screen on the left is
displayed when the power
is turned ON.
−
Note
−
Refer to Chapter 4, 4.4.3-
[10] Startup Config to stop
displaying the message.
Default settings displays
the message.
The message is displayed
after full reset when the
registry is not backed up. Reset the registry as
necessary.
Follow the instructions
on Chapter 2, 2.5.2
Turning the Power OFF
after Registry Backup to
backup the registry.
The screen on the left is
displayed when the
wireless device is opened
without setting the
wireless region code. The message is displayed
when the wireless device
is opened without setting
the wireless region code.
Contact the system
administrator.
The screen on the left is
displayed when the
wireless device is
working. Fatal error most likely
caused by hardware has
occurred. Contact the system
administrator.