Denso BHT-1260BWB-CE, User Manual

Page: 136 / 251

124
BHT-1200 Series
Export WLAN Settings:
“
Export WLAN Settings” button is used to create a registry file which contains only the WLAN settings
(WLAN registry file).
Tap the
“Export WLAN settings” button to create the WLAN registry file.
The WLAN registry file can be copied to other BHT with the registry file (*.reg).
Refer to 4.4.3 System Properties
– [13] Registry Editor – Registry file (*reg), for how to import the registry
file with the Registry file(*reg).

Note

The registry file (*reg) can be used only when both BHTs support the WLAN export function.
To import the WLAN settings from a non-supported BHT, copy all registry keys with the
RegEdit or Command prompt (CMD).
The registry file copied from a non-supported BHT cannot be exported properly to a
supported BHT.
Write log to flash:
Save the wireless logs (i.e. connected, disconnected, roamed) to the Flash folder.
Logs are saved in the "Flash\WLANlog" folder up to the maximum log storage size specified by the "Log
area size".
If the saved log size exceeds the maximum size specified, old logs are deleted to reduce the storage
space then latest logs are saved.
100MB of
“Log area size” is roughly equivalent to 36 hours of log data. (Available storage capacity varies
depending on communication conditions.)