4
EnGlisH
This section explains how to make connections for all of the
supported audio signals.
NOTE
•
Do not plug in the power cord until all connections have been
completed.
•
When making connections, also refer to the owner’s manual of the
other components.
•
Be sure to connect the left and right channels properly (left with left,
right with right).
•
Do not bundle power supply cords together with connection cables.
Doing so can result in humming or noise.
Connections
Analog connections
n
Unbalanced connection (RCA)
Cables used for connections
Audio cable (supplied)
Audio cable
R
L
R
L
(White)
(Red)
R
L
R
L
AUDIO
R
L
IN
AUDIO
Amplifier/
Mixer/
Pre amplifier
NOTE
To output sound from the front speakers of this unit, turn the speaker
output switch on the front panel “ON”. To output sound from an
external device connected to this unit, turn the OUTPUT switch on
the front panel “ON”. Audio is not output when the Speaker output
switch or OUTPUT switch are “ OFF”.
n
Balanced connection (XLR)
Cables used for connections
Audio cable (sold separately)
Balanced cable
AUDIO
R
L
IN
Amplifier/
Mixer/
Pre amplifier
The volume level for balanced connection can be adjusted using the
LEVEL knob on the rear panel.
NOTE
To output sound from the front speakers of this unit, turn the speaker
output switch on the front panel “ON”. To output sound from an
external device connected to this unit, turn the OUTPUT switch on
the front panel “ON”. Audio is not output when the Speaker output
switch or OUTPUT switch are “ OFF”.
Audio connections
