Get
ting Star
ted
Connections
Set
tin
g
s
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
Remot
e Contr
ol
Operating the Main Remote Control Unit
Calling out
DVD/HDP (including BD and CD) or VCR/DVR mode buttons can be
stored at unused TV or SAT/CBL mode buttons.
For example, when DVD mode buttons are assigned to the TV mode,
the DVD mode operations can be performed while in the TV mode.
Punch Through Function
1
Press
[MAIN]
, to select “MACRO”.
2
Press
[MACRO]
(
1
~
3
) at which the signals were
registered.
The registered signals are transmitted in the registered
sequence.
1
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press
[9]
,
[8]
and
[4]
, in that order.
The signal transmission indicator flashes twice and the punch
through setting mode is set.
3
Press
[DEVICE SELECTOR]
for the device you want to
punch through (
[DVD/HDP]
or
[VCR/DVR]
).
4
Press the button you want to punch through (
[
1
]
,
[
2
]
,
[
6
]
,
[
7
]
,
[
8
]
,
[
9
]
or
[
3
]
).
Each time the button is pressed, the signal transmission
indicator flashes once.
5
Press
[DEVICE SELECTOR]
for the device you want to
punch through (
[TV]
or
[SAT/CBL]
).
6
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice and the setting
is completed.
This function lets you register a series of operations at a single
button.
For example, the amplifier can be turned on, the input source selected,
the monitor’s power turned on, the source device’s power turned on
and the play mode set all by pressing a single button.
Up to 32 signals each can be registered at
[MACRO]
(
1
~
3
).
MACRO Function
1
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press
[9]
,
[7]
and
[8]
, in that order.
The signal transmission indicator flashes twice and the system
call registration mode is set.
3
Press
[MACRO]
(
1
~
3
) at which you want to register
the signals.
4
Press the buttons you want to register in the same
sequence as the operations you want to perform.
The signal transmission indicator lights when a button is
pressed.
Example
: Press
[POWER ON]
.
↓
Press
[DEVICE SELECTOR]
–
[DVD/HDP]
.
↓
Press
[
1
]
.
The mode can be switched by pressing
[DEVICE SELECTOR]
.
Perform the registration procedure for all the buttons you want
to register.
b
b
5
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice and the setting
is completed.
NOTE
Registration is not possible in ZONE2, ZONE3, ZONE4 and MACRO
modes.
Registering
[0 ~ 9]
[C, –]
[ DVD/HDP]
[ SAT/CBL]
[ VCR/DVR]
[ TV]
[DEVICE
SELECTOR]
[
8
], [
1
],
[
9
], [
6
],
[
3
], [
7
], [
2
]
[RC SETUP]
[ MAIN]
[POWER ON]
Signal
transmission
indicator
[0 ~ 9]
[DEVICE
SELECTOR]
[MACRO]
[RC SETUP]
Signal
transmission
indicator
NOTE
The Punch Through function can only be registered for either TV or
SAT/CBL. DVD/HDP punch through may be automatically assigned,
depending on the equipment that has been preset to TV and SAT/
CBL.
