Chapter 2 17
The QH5 offers you three ways of changing the impact device angle:
From the measuring screen touch
to enter the select /
edit mode and touch
to select angle. Edit using
-
and touch
to save.
Touching the
key as long it was set to Angle in the
direct access options that can be set for this key
(Page35).
From the hardness configuration menu under Angle
(Page
34).
Material and hardness unit options depend on the impact device that is
connected to the unit.
Before measuring make sure that the impact device you will be using
meets your needs in terms of the material, hardness unit, and hardness
range in which you want to measure.
The QH5 offers you three ways to change the material:
On the numerical screen in mode-2 only
(Page 11)
touch
to enter the select / edit mode and touch
to select the
material. Edit using the cursor keys and touch
to save.
Touching the
as long it was set to Material in the direct
access options that can be set for this key
(Page 35).
From the main menu under Materials
(Page35).
