DEMA E-Royal Modest 2021, Operation And Maintenance Manual

Page: 47 / 60

Karbantartási figyelmeztetés
Amikor a sebességmező megjeleníti az nnA értéket,
nyomja meg a + / - gombot a 0 vagy a 1 opció kiválasz -
tásához. 0 a funkció kikapcsolása, míg az 1 megjeleníti
a figyelmeztetést. A kijelző a karbantartási szükségletet
olyan információk alapján igényli, mint pl.a felhalmozott
megtett távolság és az akkumulátor töltési ciklusai. Ha a
felhalmozott teljes távolság meghaladja az 5000 km-t (a
gyártó szabja meg), a kijelzőn a (service) szimbólum lát -
ható. A kijelző bekapcsolásakor a felhalmozott teljes távolság jelzése 4 másodpercig villog, je -
lezve, hogy a karbantartás szükséges. Ha az akkumulátor töltési ciklusainak száma meghaladja
a 100-at (a gyártó szabja meg), a kijelzőn a(service) szimbólum jelenik meg. A kijelző bekapcso -
lásakor az akkumulátor jelzője 4 másodpercig villog, jelezve, hogy karbantartás szükséges. A
karbantartás riasztás funkció kikapcsolható: settings ->maintenance alert (MA) -> 0 . (A karbantartási
riasztást számítógépen is beállíthatja, USB-kapcsolatot igényel, lásd a paraméterek beállítását is).
Kerékátmérő ellenőrzése
A sebességmező a Wd feliratot jelzi, a méretek angol mértékegységben – coll -
ban vannak megadva. A rossz kerékátmérő a végsebesség és gyorsulás rendelle -
nességeihez vezethet. E beállítás után nyomja meg röviden (<0,3 másodperc)
a sebesség korlátozás beállítási felületéhez.
Sebességkorlátozási beállítás
Amikor a sebességmező az SPL -t jelzi, a távolságmező megjeleníti a sebesség
korlátozás értékét. A minimális érték 12 km/ó, a maximális érték 60 km/óra.
Beállítás után röviden (<0.3 másodperc) nyomja meg a gombot az akkumulá -
tor kommunikáció menüjébe való belépéshez.
Az akkumulátor adatai
A sebesség mező a b01 -et és a távolsági mező a sebességlimitet mutassa.
Nyomja meg az üzemmódgombot (<0,3 másodperc) az adatok görgetésé
-
hez. A beálítás után nyomja meg ismét az üzemmód gombját a hibaüzenetet
kiolvasásához. Az adatok csak akkor jelennek meg, ha hibátlan kommuniká -
ció van az akkumulátor és a vezérlő között. Másként csak --- jelenik meg.
Az akkumulátor adatait az alábbi táblázat magyarázza.
Kód Leírás Egység Kód Leírás Egység
b01 Jelenlegi hőmérséklet °C b11 Töltési / kisütési ciklusok
b04 Teljes feszültség V b12
A leghosszabb töltés nélküli
időköz
h
b06 Átlagos áram értéke A b13 Az utolsó töltés óta eltelt idő H
b07 A fennmaradó kapacitás Ah d00 Szegmensek száma
b08 Teljes kapacitás Ah d01 1.Szegmens feszültsége V
b09 Relatív töltési állapot d02 2.Szegmens feszültsége V
b10 Abszolút töltési állapot dn n.Szegmens feszültsége V
11 DISPLAY MANUAL DP C10.UART
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
backlight brightness.
• Display Backlight Brightness
When the speed field displays bL1, press
/ to choose a figure between 1 and 5.
The figure 1 represents the lowest brightness
while 5 indicates the highest display back-
light brightness.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
automatic off time.
• Automatic Off Time
When the speed field displays OFF, press
/ to choose a figure between 1 and 9.
The figures indicate the minutes that it takes
to automatically shut down the display.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
maintenance warning.
• Maintenance Warning (can be deacti-
vated)
When the speed field displays nnA, press
/ to choose either 0 or 1. 0 disables the
function while 1 enables it.
1) The display will prompt maintenance
necessity based on such information as the
accumulated riding distance and the battery
charge cycles.
2) When the accumulated total riding dis-
tance exceeds 5,000 km (can be customized
by the manufacturer), the display will show
the symbol
. When the display is
started up, the sign for accumulated riding
distance will flash for 4 seconds, indicating
that maintenance is necessary.
3) When the number of battery charge cy-
cles exceeds 100 (can be customized by the
manufacturer), the display will the symbol
. When the display is started up,
the sign for battery will flash for 4 seconds,
indicating that maintenance is necessary.
4) The maintenance alert function can be
disabled: settings ->maintenance alert (MA)
-> 0. (Maintenance alert can also be set via
a computer. This requires a USB connection.
See also the parameter setting instructions).
PARAMETER SETTING
11 DISPLAY MANUAL DP C10.UART
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
backlight brightness.
• Display Backlight Brightness
When the speed field displays bL1, press
/ to choose a figure between 1 and 5.
The figure 1 represents the lowest brightness
while 5 indicates the highest display back-
light brightness.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
automatic off time.
• Automatic Off Time
When the speed field displays OFF, press
/ to choose a figure between 1 and 9.
The figures indicate the minutes that it takes
to automatically shut down the display.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
maintenance warning.
• Maintenance Warning (can be deacti-
vated)
When the speed field displays nnA, press
/ to choose either 0 or 1. 0 disables the
function while 1 enables it.
1) The display will prompt maintenance
necessity based on such information as the
accumulated riding distance and the battery
charge cycles.
2) When the accumulated total riding dis-
tance exceeds 5,000 km (can be customized
by the manufacturer), the display will show
the symbol
. When the display is
started up, the sign for accumulated riding
distance will flash for 4 seconds, indicating
that maintenance is necessary.
3) When the number of battery charge cy-
cles exceeds 100 (can be customized by the
manufacturer), the display will the symbol
. When the display is started up,
the sign for battery will flash for 4 seconds,
indicating that maintenance is necessary.
4) The maintenance alert function can be
disabled: settings ->maintenance alert (MA)
-> 0. (Maintenance alert can also be set via
a computer. This requires a USB connection.
See also the parameter setting instructions).
PARAMETER SETTING
11 DISPLAY MANUAL DP C10.UART
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
backlight brightness.
• Display Backlight Brightness
When the speed field displays bL1, press
/ to choose a figure between 1 and 5.
The figure 1 represents the lowest brightness
while 5 indicates the highest display back-
light brightness.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
automatic off time.
• Automatic Off Time
When the speed field displays OFF, press
/ to choose a figure between 1 and 9.
The figures indicate the minutes that it takes
to automatically shut down the display.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
maintenance warning.
• Maintenance Warning (can be deacti-
vated)
When the speed field displays nnA, press
/ to choose either 0 or 1. 0 disables the
function while 1 enables it.
1) The display will prompt maintenance
necessity based on such information as the
accumulated riding distance and the battery
charge cycles.
2) When the accumulated total riding dis-
tance exceeds 5,000 km (can be customized
by the manufacturer), the display will show
the symbol
. When the display is
started up, the sign for accumulated riding
distance will flash for 4 seconds, indicating
that maintenance is necessary.
3) When the number of battery charge cy-
cles exceeds 100 (can be customized by the
manufacturer), the display will the symbol
. When the display is started up,
the sign for battery will flash for 4 seconds,
indicating that maintenance is necessary.
4) The maintenance alert function can be
disabled: settings ->maintenance alert (MA)
-> 0. (Maintenance alert can also be set via
a computer. This requires a USB connection.
See also the parameter setting instructions).
PARAMETER SETTING
11 DISPLAY MANUAL DP C10.UART
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
backlight brightness.
• Display Backlight Brightness
When the speed field displays bL1, press
/ to choose a figure between 1 and 5.
The figure 1 represents the lowest brightness
while 5 indicates the highest display back-
light brightness.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
automatic off time.
• Automatic Off Time
When the speed field displays OFF, press
/ to choose a figure between 1 and 9.
The figures indicate the minutes that it takes
to automatically shut down the display.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
maintenance warning.
• Maintenance Warning (can be deacti-
vated)
When the speed field displays nnA, press
/ to choose either 0 or 1. 0 disables the
function while 1 enables it.
1) The display will prompt maintenance
necessity based on such information as the
accumulated riding distance and the battery
charge cycles.
2) When the accumulated total riding dis-
tance exceeds 5,000 km (can be customized
by the manufacturer), the display will show
the symbol
. When the display is
started up, the sign for accumulated riding
distance will flash for 4 seconds, indicating
that maintenance is necessary.
3) When the number of battery charge cy-
cles exceeds 100 (can be customized by the
manufacturer), the display will the symbol
. When the display is started up,
the sign for battery will flash for 4 seconds,
indicating that maintenance is necessary.
4) The maintenance alert function can be
disabled: settings ->maintenance alert (MA)
-> 0. (Maintenance alert can also be set via
a computer. This requires a USB connection.
See also the parameter setting instructions).
PARAMETER SETTING
12
DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
Használati útmutató HU 47