DEMA E-Royal Modest 2021, Operation And Maintenance Manual

Page: 23 / 60

Varovná hláška údržby
Pokud řádek rychlosti zobrazuje nnA , zadejte tlačít -
ky + nebo - buď 0 nebo 1. Hodnota „0“ funkci deak -
tivuje, zatímco hodnota „1“ ji aktivuje. Displej poté
upozorní uživatele na nutnost provedení údržby v
závislosti na ujeté vzdálenosti a počtu nabíjecích cyk -
lů baterie. Pokud hodnota celkové ujeté vzdálenosti
přesáhne limit 5000 km (hodnotu může výrobce po -
změnit), zobrazí displej nápis SERVICE . Po spuštění
displeje bude znak celkové vzdálenosti blikat po dobu čtyř vteřin, aby upozornil na nutnost
servisní údržby. Pokud hodnota nabíjecích cyklů baterie přesáhne 100 (limit může být změněn
výrobcem), displej zobrazí nápis SERVICE . Po spuštění displeje bude symbol baterie blikat po dobu
4 vteřin jako upozornění nutnosti servisní kontroly. Tuto funkci lze deaktivovat následovně: se-
ttings – maintenance alert ( MA ) – 0. Tato funkce se také dá nastavit počítačem skrze USB.
Průměr kola
Řádek rychlosti zobrazuje Wd . Jednotkou měření jsou palce. Špatný rozměr ko -
la může vést k nepřesnostem v měření. Po zadání stiskněte tlačítko režimu v
intervalu menším než 0,3 vteřiny pro nastavení rychlostního limitu.
Nastavení rychlostního limitu
Pokud řádek rychlosti zobrazuje SPL , pak řádek vzdálenosti zobrazuje rych -
lostní limit. Min. rychlostní limit je 12 km/h a max. poté je 60 km/h. Po na -
stavení krátce stiskněte tlačítko režimu v intervalu menším než 0,3 vteřiny
pro vstup do menu baterie.
Údaje o baterii
Řádek rychlosti zobrazuje b01 a vzdálenostní okénko zobrazuje rychlostní
limit. Stiskněte tlačítko režimu v intervalu menším než 0,3 vteřiny pro lis -
tování cykly zpět. Po vložení, tlačítko opět stiskněte pro vstup do rozhraní
paměti k chybovým hláškám. Dané údaje se budou zobrazovat pouze tehdy,
pokud je bezchybná komunikace mezi baterií a ovladačem. Jinak se zobrazí
pouze --- . Údaje k baterii naleznete v tabulce níže.
Kód Popis Jednotka Kód Popis Jednotka
b01 Aktuální teplota °C b11 Nabíjecí/Vybíjecí cykly
b04 Napětí V b12 Nejdelší interval bez nabití h
b06 Průměrný proud A b13 Doba od posledního nabití H
b07 Zbývající kapacita Ah d00 Počet segmentů
b08 Celková kapacita Ah d01 Napětí segmentu 1 V
b09 Relativní stav nabití d02 Napětí segmentu 2 V
b10 Absolutní stav nabití dn Napětí segmentu n V
10 DISPLAY MANUAL DP C10.UART
PARAMETER SETTING
• Items to be Set
1
〉 Data reset
2
〉 Km/mile
3
〉 Light sensitivity
4
〉 Display backlight brightness
5
〉 Automatic off time
6
〉 Maintenance warning settings
7
〉 Check wheel diameter
8
〉 Speed Limit Setting
9
〉 Speed model
10
〉 Battery infromation10 error code
• Setting Preparation
1) When the display is active, press
twice (interval < 0.3 seconds). The system
will enter the MENU parameter setting
state, in which the display parameters can
be set. Press
twice again (interval < 0.3
seconds) to return to the main menu.
2) If no operation is performed for 10 sec-
onds, the display will return to the normal
riding display.
3) In the parameter setting state, when the
parameter you want to set begins to flash,
press / to adjust the parameter value.
Briefly press
to switch between the pa-
rameters to be set. Press twice (interval
< 0.3 seconds) to exit the submenu.
• Data reset
Press twice (interval < 0.3 seconds) –
the display enters the MENU state. In the
speed field tC is displayed. If you press ,
a "y" is also displayed. Now all temporary
data, e.g. maximum speed (MAXS), average
speed (AVG) and single trip distance (TRIP)
can be cleared. Briefly press
(< 0.3 sec-
onds) to enter the km/mile setting interface.
If the user does not reset the data, the single
trip distance and the accumulated total rid-
ing time will be automatically cleared when
the accumulated total riding time exceeds
99 hours and 59 minutes.
* The data will not be cleared when the
display’s light-sensing function is set to 0 or
when it is switched off!
• Km/mile
When the speed field displays S7, press
/ to switch between km/h and mph, or
to set km or mile. After this setting, briefly
press
(< 0.3 seconds) to enter the
setting interface of light sensitivity. Default
display is km.
• Light Sensitivity
When the speed field displays bL0, press
/ to choose a figure between 0 and 5.
The higher the chosen figure, the higher the
light sensitivity.
11 DISPLAY MANUAL DP C10.UART
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
backlight brightness.
• Display Backlight Brightness
When the speed field displays bL1, press
/ to choose a figure between 1 and 5.
The figure 1 represents the lowest brightness
while 5 indicates the highest display back-
light brightness.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
automatic off time.
• Automatic Off Time
When the speed field displays OFF, press
/ to choose a figure between 1 and 9.
The figures indicate the minutes that it takes
to automatically shut down the display.
After this setting, briefly press (< 0.3
seconds) to enter the setting interface of
maintenance warning.
• Maintenance Warning (can be deacti-
vated)
When the speed field displays nnA, press
/ to choose either 0 or 1. 0 disables the
function while 1 enables it.
1) The display will prompt maintenance
necessity based on such information as the
accumulated riding distance and the battery
charge cycles.
2) When the accumulated total riding dis-
tance exceeds 5,000 km (can be customized
by the manufacturer), the display will show
the symbol
. When the display is
started up, the sign for accumulated riding
distance will flash for 4 seconds, indicating
that maintenance is necessary.
3) When the number of battery charge cy-
cles exceeds 100 (can be customized by the
manufacturer), the display will the symbol
. When the display is started up,
the sign for battery will flash for 4 seconds,
indicating that maintenance is necessary.
4) The maintenance alert function can be
disabled: settings ->maintenance alert (MA)
-> 0. (Maintenance alert can also be set via
a computer. This requires a USB connection.
See also the parameter setting instructions).
PARAMETER SETTING
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
12 DISPLAY MANUAL DP C10.UART
• Wheel Diameter check
Speed position displays
Wd, The measurements
are in inches. A wrong
wheel diameter can lead
to speed anomalies.
After this setting, briefly
press (< 0.3 seconds) to
enter the setting interface of speed limit.
• Speed Limit Setting
When the speed field
displays SPL, the distance
field displays the value of
the speed limit. Minimum
speed limit is 12km/h,
maximum speed limit is
60km/h.
After setting, Briefly Press (< 0.3
seconds) to enter the menu of battery com-
munication.
• Battery Communication
The speed field displays
b01 and the distance field
displays the speed limit.
Press
(< 0.3 seconds)
to cycle backward. After
this setting, press
(<
0.3 seconds) to enter into
the interface of memory for error code.
1) Only when communication has been
established between the battery and the
controller the following information will be
displayed, otherwise the display will only
show "- - - -".
2) Information on the battery menu:
The speed
field displays
Definition Unit
b01
Current
temperature
℃
b04 Total voltage V
b06 Average current A
b07
Remaining
capacity
Ah
b08 Full capacity Ah
b09
Relative state of
charge
b10
Absolute state
of charge
b11
Charge/
discharge cycle
b12
Longest period
without charge
h
b13
Period since last
charge
h
d00 Cell quantity
d01
Voltage of
cell 1
V
d02
Voltage of
cell 2
V
……… ………
dn
Voltage of
cell n
V
Návod na obsluhu a údržbu elektrokola CZ 23