DEMA E-Royal Modest 2021, Operation And Maintenance Manual

Page: 45 / 60

4.1. Alap vezérlés
Ki / bekapcsolás
Kapcsolja be a készüléket, nyomja meg és tartsa lenyomva 2 másodpercig a kijelző bekapcsolá -
sához. Nyomja meg újra és tartsa lenyomva 2 másodpercig a kijelző kikapcsolásához. Ha a kerék -
pár nincs használatban, 5 perc elteltével (ez az idő beállítható ), a kijelző automatikusan kikapcsol.
Rásegítési mód választása
Manuális váltás üzemmódban választja ki a kívánt
rásegítési szintet a (plus) és (minus) gombokkal. A
legalacsonyabb szint az 1. szint, a legmagasabb az
5. szint. Amikor a kijelző bekapcsol, az alapértel -
mezett mód az 1. szint. Ha nincs szám kijelezve,
a rásegítés nem aktív. A rásegítés kapcsoló-kezelő
felülete az alábbi ábrán látható.
Fényszóró / kijelző háttérvilágítás kapcsoló
Nyomja meg a
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
. gombot 2 másodpercig. A kijelző
háttérvilágítása, valamint a első és a hátsó lámpa
világít. Nyomja meg újra a
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
gombot 2 másod -
percig a kijelző háttérvilágítása / első / hátsó lámpa
kikapcsolásához. A felhasználó által kiválasztható 5
háttérvilágítás fényerő áll rendelkezésre. (Ha a sötét
környezetben bekapcsolja a kijelzőt, akkor a kijelző
háttérvilágítása / első / hátsó lámpa automatikusan
bekapcsol. Ha a kijelző háttérvilágítása / első / hát -
só lámpa manuálisan ki van kapcsolva, ezeket kö -
vetkezőleg manuálisan is be kell kapcsolni.
Toló támogatás
Nyomja meg a - gombot 2 másodpercig. Az e-bike
aktiválja a toló támogatást, és megjelenik a WALK
szimbólum. A - gombot tartsa lenyomva addig,
amíg igényli a támogatást.
Váltás a távolság és a sebesség kijelzés között
Nyomja meg röviden a gombot a távolság és a
sebesség közötti váltáshoz. Az egyszeri út távolság
( TRIP km ), a teljes távolság ( TOTAL km ), maximális
sebesség ( MAXS km/h ), az átlagos sebesség ( AVG
km/h ), a hátralévő távolság ( RANGE ) és az ener -
giafogyasztás ( C ) – ilyen sorrendben jelenik meg.
(Kapcsolási mód az interfészen az alábbiak szerint).
Akku töltöttség kijelzése
Ha az akkumulátor töltöttsége normális állapotban
van, adott számú LCD szegmens világít a tényle -
ges töltöttségnek megfelelően. Ha a 10 szegmens
mindegyike eltűnik, a szegély villog, az akkumulá -
tort azonnal fel kell tölteni.
7 DISPLAY MANUAL DP C10.UART
BUTTON DEFINITION
NORMAL OPERATION
• ON/OFF Switch
Turn on the device, press and hold for
2s to power on the display. Press and hold
again for 2s to power off the display, If
the bike is not used, after 5 minutes (time
can be set) the display will be automatically
turned off.
• Assist Mode Selection
In the manual gearshift mode, press the
or choose the desired level of support by
the motor. The lowest level is Level 1, the
highest Level 5. When the display is on, the
default mode is Level 1. When there is no
numeric mode display, there is no power
assistance.
(power assistance lever selection interface as
below figure)
BUTTON DEFINITION
Headlight button
Switch button
Mode button
Up button
Down button
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
9 DISPLAY MANUAL DP C10.UART
NORMAL OPERATION
• Battery Status Indication
When the battery status is normal, a certain number of the battery LCD segments as well as the bor-
der light up according to the actual quantity of charge. If all of the 10 segments will black out with
the border blinking, the battery needs to be charged immediately.
• Battery status indication
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
10 ≥90% 6 50%≤C<60% 2 15%≤C<25%
9 80%≤C<90% 5 45%≤C<50% 1 5%≤C<15%
8 70%≤C<80% 4 35%≤C<45%
Border
blinking
C<5%
7 60%≤C<70% 3 25%≤C<35%
• When display turns off, connect the USB
cable to the port of the display and then dis-
play turn on and begin charge. If display is
being on, only connect the USB cable to the
port to the display and display begin charge.
Maximum charge voltage is 5V
, maximum
charge current is 500mA
Használati útmutató HU 45