DEMA E-Royal Modest 2021, Operation And Maintenance Manual

Page: 9 / 60

4.1. Základné ovládanie
Zapnutie/Vypnutie
Zapnite zariadenie stlačením a podržaním tlačidla na dve sekundy. Opätovným stlačením
a podržaním tohto tlačidla panel vypnete. Ovládací panel sa sám vypne, ak výrobok nie je
používaný po dobu 5 minút. Tento čas sa dá nastaviť podľa vlastnej vôle.
Voľba režimu asistencie
Pri manuálnej zmene prevodov použite tieto tlačidlá
+ , - pre voľbu úrovne motorovej podpory. Úroveň 1 je
najnižšia a úroveň 5 najvyššia. Pri spustení displeja je
výrobcom prednastavená úroveň 1. Ak zariadenie nemá
numerický displej, nemá ani asistenčnú podporu. Pozrite
sa na asistenčné rozhranie podľa obrázka nižšie.
Osvetlenie/Podsvietenie displeja
Stlačte a na dve sekundy podržte tlačidlo
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
. Zapne sa
predné a zadné osvetlenie vrátane podsvietenia disple -
ja. Stlačením a podržaním tlačidla na dve sekundy svetlá
vypnete. U podsvietenia sa dá navoliť 5 úrovní jasu. Ak
displej zapnete v tmavom prostredí, aktivuje sa osvetle -
nie a podsvietenie automaticky. Ak ho zapnete ručne,
musíte ho potom ručne aj sami vypnúť.
Asistent chôdze
Stlačte tlačidlo - a podržte dve sekundy. Zobrazí sa nápis
WALK a zariadenie prejde do asistencie chôdze. Ak tla -
čidlo uvoľníte, systém režim opustí.
Prepínanie medzi režimom rýchlosti a vzdialenosti
Letmým stlačením tlačidla režimu prepnete medzi
režimom rýchlosti a vzdialenosti. Čiastková vzdiale -
nosť ( TRIP km ), celková vzdialenosť ( TOTAL km ), max.
rýchlosť ( MAXS km/h ), priemerná rýchlosť ( AVG km/h ),
zvyšná vzdialenosť ( RANGE ) energetická spotreba ( C ) je
zobrazená a v danom poradí. Režimové rozhranie sa dá
prepínať podľa obrázku.
Ukazovateľ stavu batérie
Ak je stav batérie v norme, budú svietiť uvedené seg -
menty nabitia vrátane obvodového rámca podľa zodpo -
vedajúceho stavu. Pokiaľ nebude svietiť žiadny segment
a rámček bude blikať, znamená to, že musíte batériu
znova nabiť.
7 DISPLAY MANUAL DP C10.UART
BUTTON DEFINITION
NORMAL OPERATION
• ON/OFF Switch
Turn on the device, press and hold for
2s to power on the display. Press and hold
again for 2s to power off the display, If
the bike is not used, after 5 minutes (time
can be set) the display will be automatically
turned off.
• Assist Mode Selection
In the manual gearshift mode, press the
or choose the desired level of support by
the motor. The lowest level is Level 1, the
highest Level 5. When the display is on, the
default mode is Level 1. When there is no
numeric mode display, there is no power
assistance.
(power assistance lever selection interface as
below figure)
BUTTON DEFINITION
Headlight button
Switch button
Mode button
Up button
Down button
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
8 DISPLAY MANUAL DP C10.UART
• Switch between Distance Mode and
Speed Mode
Briefly press to switch between distance
and speed. Single-trip distance (TRIP km) ,
total distance (TOTAL km) maximum speed
(MAXS km/h) ,average riding speed (AVG
km/h) , remaining distance(RANGE) and
energy consumption (C) are displayed in
successive order.(Switch mode interface as
below)
• Headlight/ Display Backlight Switch
Press for 2 seconds. The backlight of
the display as well as the headlight and tail-
light will be turned on. Press
again for
2 seconds to power off the display backlight
/ headlight / taillight. There are 5 levels of
backlight brightness that can be selected by
the user. (If the display is turned on in a dark
environment, the display backlight / head-
light / taillight will be turned on automati-
cally. If the display backlight / headlight / tail-
light are turned off manually, they also need
to be turned on manually afterwards)
• Walk Assistance
Press for 2 seconds. The e-bike enters
the walk assistance mode, and the symbol
WALK is displayed. Once the key is
released, the e-bike will exit the walk as-
sistance mode.
9 DISPLAY MANUAL DP C10.UART
NORMAL OPERATION
• Battery Status Indication
When the battery status is normal, a certain number of the battery LCD segments as well as the bor-
der light up according to the actual quantity of charge. If all of the 10 segments will black out with
the border blinking, the battery needs to be charged immediately.
• Battery status indication
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
Number of
Segments
Charge in
Percentage
10 ≥90% 6 50%≤C<60% 2 15%≤C<25%
9 80%≤C<90% 5 45%≤C<50% 1 5%≤C<15%
8 70%≤C<80% 4 35%≤C<45%
Border
blinking
C<5%
7 60%≤C<70% 3 25%≤C<35%
• When display turns off, connect the USB
cable to the port of the display and then dis-
play turn on and begin charge. If display is
being on, only connect the USB cable to the
port to the display and display begin charge.
Maximum charge voltage is 5V
, maximum
charge current is 500mA
Návod na obsluhu a údržbu elektrobicykla SK 9