3
Operating manual for LT series cooling water heat exchanger
2. General safety information
Information marks in the operating manual
Safety information whose non-observance may cause danger to persons is
marked with the general danger symbol "Safety symbols according to DIN 4844-
W 9".
When warning against electrical voltage, the marking occurs in accordance with
"Safety symbols according to DIN 4844-W 8".
General information that should be observed by the person performing the setup
or the operator is marked with the following symbol.
This operating manual does not contain any general safety rules for cooling and
electrical installations.
In accordance with EG machine directive 2006/42/EG from May 17th, 2006,
appendix II A, we declare that the designated machine complies with the basic
safety and health regulations of the EG directive 2004/42/EG from appendix I,
articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.5.1 in its design and construction. This
declaration becomes invalid in case of modifications without our prior
agreement.
Furthermore, compliance with the following regulations/directives applying to the
product is declared:
-EG Pressurized device directive (97/23/EG) from May 27th, 1997
-EMC Directive (2004/108/EG) from December 15th, 2004
-EG Low voltage directive (2006/95/EG) from December 12th, 2006
In particular the following harmonized standards:
-EN 60204-1:2006
Safety of machines; Electrical equipment of
machines; Part 1: General regulations
-EN ISO 12100:2003
Safety of machines; General requirements
-DIN EN 378-1 b. 4:1/2008 Cooling installations and heat pumps; Safety-relevant
and environmentally relevant requirements; Parts 1 to 4
