
13
Operating manual for LT series heat exchanger
10.
Commissioning
If the cooling circuit is filled as described in point 8 and the device is electrically
connected as described in point 9, the heat exchanger may be started / stopped
using the button, see controller description in the appendix.
The error notifications are to be requested as aggregate error notifications with
potential free queries to the Harting connector. See circuit diagram.
In case of deviations of the set value, a warning signal is output to the display of
the controller.
Information on hydraulic device adaptation
A hydraulic adaptation to the local conditions is to be performed on-site for each
device. For this, DMG co. need to install baffle plates in order to regulate the
corresponding flow rates. It should be ensured that the set water pressure and the
flow rates are in the application domain of the pump characteristic. Operating
conditions deviating from this may cause damages to the pump.