01 ALARMS
Alarm signals
A1-F
Temperature sensor A1 failure (defective or not connected, limit temperature undercut or
exceeded).
A1-H
The set temperature (TEMP MAX) has been exceeded.
A1-L
The set temperature (TEMP MIN) has been undercut.
A2-F
Temperature sensor A2 failure (defective or not connected, limit temperature undercut or
exceeded).
FS
Flow monitor has switched off. Recirculated quantity in circuit too low, air in system
MS
Motor overload switch of the pump has tripped.
- 01-
ALARMS
In the ALARMS level, the upcoming alarms are shown. By
pressing the OK key, the display window can be reached. If
many alarms are set, the status messages can be shown
individually with the UP or DOWN keys.
Is shown when no alarm is set.
NO EVENT
AVAILABLE
