Deltafox 77002551, Translation Of The Original Instructions For Use

Page: 75 / 196

GB
75
i) Support plates or workpieces
to reduce the risk of kickback
from a jammed cutting disc.
Large workpieces may bend
under their own weight. The
workpiece must be supported
on both sides of the disc, near
the cutting disc as well as also
at the edge.
j) Be particularly careful for pock -
et cuts in existing walls or other
areas where you cannot see
what is there. The cutting disc
may cause a kickback when
it cuts into gas or water lines,
electrical lines or other hidden
objects.
Additional safety information
a) Approved cutting disk types:
segmented diamond disks with
a maximum space of 10 mm
between segments, only with a
negative cutting angle.
Disk diameter: 150 mm
Disk thickness: 2,4 mm
Warning! Always wear ear
protection.
R esidual Risks
Even if properly operating and
handling this electric tool, some
residual risks will remain. Due
to its construction and build, this
electric tool may present the fol-
lowing hazards:
a) Lung damage if suitable res -
piratory protection is not worn.
b) Hearing damage if suitable ear
protection is not worn.
c) Damage to health due to
- touching the area of the grind-
ing tool which is not covered;
- ejection of parts of workpiec-
es or damaged grinding discs.
d) Health injuries which result
from swinging hand and arm,
in the event that the device is
used over a longer period of
time or is not used and main-
tained properly.
Warning! During
operation,this electric tool
generates an electromag-
netic field which, under
certain circumstances, may
impair the functionality of
active or passive medical
implants. To reduce the risk
of serious or lethal injuries,
we recommend that per-
sons with medical implants
consult their doctor and the
manufacturer of their medi-
cal implant before operating
the machine.