Deltafox 77002551, Translation Of The Original Instructions For Use

Page: 71 / 196

GB
71
instructions to operate the
power tool. Power tools are
dangerous in the hands of un-
trained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power
tool’s operation. If damaged,
have the power tool repaired
before use. Many accidents
are caused by poorly main-
tained power tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less Iikely to bind
and are easier to control.
g) Use the power tool, accesso-
ries and tool bits etc. in ac-
cordance with these instruc-
tions, taking into account the
working conditions and the
work to be performed. Use of
the power tool for operations
different from those intended
could result in a hazardous
situation.
5) Service:
a) Have your power tool ser -
viced by a qualified repair
person using only identical
replacement parts. This will
ensure that the safety of the
power tool is maintained.
Safety instructions for
cutting
a) The protective guard on the
device must be securely
fastened, and adjusted to
ensure maximum safety, i.e.
the smallest possible sec-
tion of the abrasive surface
should be visible to the user.
Ensure that you and all per -
sons in the vicinity keep out
of the plane of the rotating
disk. The protective guard is
designed to protect users from
flying debris and accidental con -
tact with the abrasive surface.
b) Only use diamond cutting
disks with this tool. Attaching
the accessories to the device
does not guarantee safe opera-
tion.
c) The allowable rotation speed
of the attachment tools must
be at least as high as the
highest rotation speed in-
dicated on the electric tool.
Accessories that run faster than
the allowable speed can break
and fly apart.
d) Grinding discs may only be
used for the recommended
applications. For example:
Never sand with the side sur-