Deltafox 77002551, Translation Of The Original Instructions For Use

Page: 65 / 196

GB
65
Content
Introduction ..........................................65
Intended purpose ................................65
General description .............................66
Extent of the delivery......................... 66
Functional description ....................... 66
Overview ........................................... 66
Technical data ......................................66
Notes on safety ....................................67
Symbols and icons ............................ 67
General Safety Directions for
Power Tools ...................................... 68
Safety instructions for cutting ............ 71
Additional safety instructions for
all applications................................... 73
Residual Risks .................................. 75
Assembly ..............................................76
Installing/changing the cutting discs ... 76
Setting the groove depth ................... 77
Vacuuming ........................................ 77
Operation ..............................................77
Turning on and off ............................. 78
Operation .......................................... 78
Cleaning and maintenance .................79
Cleaning ............................................ 79
Maintenance...................................... 79
Storage .................................................79
Waste disposal and
environmental protection ...................80
Replacement parts/Accessories ........80
Troubleshooting ..................................81
Guarantee .............................................82
Repair Service......................................82
Introduction
The operating instructions con-
stitute part of this product. They
contain important information on
safety, use and disposal.
Before using the product, familiar-
ise yourself with all of the operat-
ing and safety instructions. Use the
product only as described and for
the applications specified.
Keep this manual safely and in the
event that the product is passed
on, hand over all documents to the
third party.
Intended purpose
The wall chaser is a tool for cutting mainly
mineral-based materials (such as con -
crete or brick) without requiring the use of
water. This tool should only be used with
diamond cutting discs.
The tool should not be used in any other
application (e.g. cutting with coolant solu -
tions, cutting harmful substances such as
asbestos).
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
This equipment is not suitable for com-
mercial use. Commercial use will invali-
date the guarantee. The tool is to be used
by adults. Children over the age of 15
may not use the tool except under super-
vision. The manufacturer is not liable for
damages caused by an improper use or
incorrect operation of this device.
Translation of the original EC
declaration of conformity ..................186
Exploded drawing ..............................193
Service-Center ...................................195