Deltafox 77002551, Translation Of The Original Instructions For Use

Page: 81 / 196

GB
81
Troubleshooting
Always unplug the shredder before working on it. Risk of electric shock!
Problems Possible Cause Error correction
Device doesn‘t
start
Mains voltage missing
Main circuit breaker is
tripped
Check the socket, mains cable,
line, mains plug, repairs to be car-
ried out by qualified electrician
if necessary, check main circuit
breaker.
On/off switch ( 3) may
be defective
Repair by Customer Care
Engine faulty
Grinding tool
does not move
although the en-
gine is runningt
Hexagon bolt ( 9) loose Tighten the hexagon bolt (see “In -
stalling/changing the cutting discs”)
Workpiece, remaining work-
pieces block drive
Remove blockages
Engine is slower
and stops
Device is overloaded
through workpiece
Reduce pressure on cutting tool
Workpiece unsuitable
Grinding disc
does not rotate
smoothly, abnor-
mal noises can
be heard
Hexagon bolt ( 9) loose Tighten the hexagon bolt (see “In -
stalling/changing the cutting discs”)
Cutting discs are defective Change cutting discs