Delta H10E, Operation And Installation Manual

Page: 5 / 51

1 General Information
1.1 Scope of delivery
Congratulations on the purchase of your Delta H9E grid-tied hybrid inverter.This
manual will assist you in becoming familiar with this product. Please observe all
safety regulations and take into account the connection requirements by your
local grid utility.
1.2 General Warnings / Notes on Safety
Careful handling of the product will contribute to it's service life durability and
reliability. Both are essential to ensure maximum yield from your product.
DANGER!
To avoid risk of electrical shock, do not open the solar inverter. The inverter contains
no user-serviceable parts. Opening the inverter will void the warranty.
Dangerous voltage is present for 60 seconds after disconnecting all sources of
power, recommend 5 minutes for discharging.
Remember that the unit has a high leakage current.
The PE conductor MUST be connected prior to commencing operation.
During operation of electrical devices, certain parts are under dangerous voltage.
Inappropriate handling can lead to physical injury and material damage.
Always adhere to the installation regulations. Installation may only be conducted
by certified electricians.
CAUTION !
WARNING !
Repair work on the device should ONLY be carried out by the manufacturer.
The inverter contains no user serviceable parts inside.
Please observe all points in the operation and installation manual. Isolate the device
from the grid, the PV modules and the battery product before undertaking work on
the device.
60 seconds
H9E supports operating under both grid-interactive mode and off-grid (stand-
alone) mode. Only the manufacturer’s authorized representatives can get
software tools via a single use password supplied by the manufacturer to change
the operating mode before commissioning. The unit can’t auto transfer Grid-inter-
active mode to Stand-alone mode. Once configured or reconfigured, the unit’s
operating mode can’t be changed by the installer or end user. If it need to operate
under stand-alone mode, an additional tool and password is needed. Please
contact Delta local service center for help.
5
General Information