Table 3-1 : LED and Reset button function
3.2.1 LED and Button
There are 5 LEDs in the front side of the inverter, from left to right, it is used for
indicating status of operation, battery, communication, information and fault.
Green
Steady on
Bar*
1s on, 4s off
The inverter feeds in grid.
Red
Steady on
Battery is in fault mode.
Red
Push 3s~10s
500ms on, 500ms off
Reset Wi-Fi module
Push 20s~30s
1s on, 1s off
Reset Wi-Fi module, and Wi-Fi password
returns to the default: DELTASOL
1s on, 1s off
Ground fault occurs
Yellow
Steady on
Battery communication timeout.
Yellow
1s on, 2s off
Battery is in standby mode.
Green
500ms on,
500ms off
Reboot Wi-Fi (Press Button 3~10s)
Green
1s on, 1s off
Reset password & Wi-Fi settings
(Press Button 20~30s)
Green
On until done Inverter initialization when grid is changing from
disconnected into connected.
Green
Steady on
Battery is in normal operation.
Color
LED
Action
LED Action
Reset button
Description
Status
Green
The inverter is synchronizing with grid.
Green
Grid is connected, but the inverter is unable to
feed in grid because PV voltage is too low.
*4 LEDs form a progress bar,
for example:
ON -
ON -
blink -
off,
means synchronization progress is 50-75%.
Yellow
1s on, 1s off
Firmware upgrading is ongoing.
Green
1s on, 1s off
Inverter is receiving image file.
Yellow
Steady on
External event occurs, inverter is unable to run.
12
Product Overview
Summary of Contents for H10E
