Delta H10E, Operation And Installation Manual

Page: 13 / 51

This unit is designed to be wall-mounted. Please ensure the installation is
perpendicular to the floor and the AC plug located at the base of the unit. Do not
install the device on a slanting wall. The dimensions of the mounting bracket
are shown in the figure below.
To mount the inverter on the wall, please follow the procedure below:
1. Screw the mounting bracket on the wall with 4 * Φ6 mm Phillips head screws.
2.Attach the inverter to the mounting bracket.
3.Secure the reinforced bracket with 2 M6 screws as
Figure 4-1
.
The inverter must be installed vertically with a maximum incline of +/-5°on a flat
surface as
Figure 4-2
.
4 Installation
4.1 Installation Location
The unit should not be installed in direct sunlight.
CAUTION !
WARNING !
Do not install the unit near or on flammable surfaces.
M ount the unit tightly on a solid/smooth surface.
The inverter can be installed in indoors / outdoors.
4.2 Mounting
Only the manufacturer’s authorized representatives can get software tools via
a single use password supplied by the manufacturer to change the operating
mode before commissioning. The unit can’t auto transfer Grid-interactive mode
to Stand-alone mode. Once configured or reconfigured, the unit’s operating
mode can’t be changed by the installer or end user.
13
Installation