Delta H10E, Operation And Installation Manual

Page: 8 / 51

2 Package Inspection
Upon receiving your brand new inverter, you will be required to remove it’s
protective packaging. This packaging consists of various materials that will need
to be disposed of according to the specific recycling marking printed on them.
Unpacking process is shown as Figure 2-1.
Figure 2-1 : Unpacking process
2.1 Instruction before Installation
Due to the variety of users and installation environments, you must read this
manual thoroughly before installation. Installation of the unit and start-up
procedures must be carried out by an accredited technician.
2.2 Unpacking
If there is any visible damage to the inverter/accesories or any damage to the
packaging, please contact your inverter supplier before installation.
CAUTION !
8
Installation and Wiring