Delta H10E, Operation And Installation Manual, Page: 17 / 51

5.2 Opening the wiring box cover
1. Place DC Disconnect switch in “OFF” position. Please note the cover cannot
be removed when the DC Disconnect switch is in the “ON” position.
2. Remove the 4 cover screws indicated above with a T20 Torx screw driver.
3. Lift the cover upward and place off to the side.
4x M4 screws
(Torx 20)
Figure 5-2 : Remove the wiring box cover
Figure 5-3 : Locations of glands
M25 DC gland
M25 BAT gland
M25 AC gland
M20 COMM. gland
Wiring Box
17
Wiring