6
FUNCTIONAL DESCRIPTION
CARTON CONTENTS
2
3
4
1
1. Mortiser
2. Tool and Chisel Holder
3. Chuck Key / Wrench
4. Column Extension
5. Hydraulic Cylinder
6. Handle
7. Extended hold-down rod (use with column extension)
8. Special Screw (for raising and lowering handle)
9. M8 x 1.25 x 80mm Head Screw (4) (for attaching column
extension to base)
8
9
10
14
15
16
17
11
12
13
5
6
7
10. M6 x 1 x 12mm Pan Head Screws (2) (for attaching tool
and chisel holder)
11. Spring
12. Bushing (for use with extra long chisels)
13. M6 Lockwashers (2) (for assembling tool and chisel
holder)
14. 1/2” Mortising Chisel and Bit
15. 3/8” Mortising Chisel and Bit
16. 5/16” Mortising Chisel and Bit
17. 1/4” Mortising Chisel and Bit
FOREWORD
The DELTA® Model 14-651 is easier to operate than a conventional drill press equipped with a mortising attachment.
The model 14-651 is made of cast-iron and steel for rigidity and stability, and comes with a standard 3-jaw type chuck
for positive gripping of mortising bits.
NOTICE:
The photo on the manual cover illustrates the current production model. All other illustrations contained in
the manual are representative only and may not depict the actual labeling or accessories included. These are intended
to illustrate technique only.
