2
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all warnings and operating instructions before using any tool
or equipment. When using tools or equipment, basic safety precautions should always be followed
to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or
equipment could result in serious injury and property damage. There are certain applications for
which tools and equipment are designed. DELTA® Power Equipment Corporation strongly recommends that
this product NOT be modified and/or used for any application other than for which it was designed.
If you have any questions relative to its application DO NOT use the product until you have written DELTA®
Power Equipment Corporation and we have advised you. Contact us online at www.DeltaMachinery.com or by
mail at Technical Service Manager, DELTA® Power Equipment Corporation , 4825 Highway 45 North, Jackson,
TN 38305.
Information regarding the safe and proper operation of this tool is available from the following sources:
• Power Tool Institute, 1300 Sumner Avenue, Cleveland, OH 44115-2851or online at www.powertoolinstitute.
com
• National Safety Council, 1121 Spring Lake Drive, Itasca, IL 60143-3201
• American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org - ANSI
01.1 Safety Requirements for Woodworking Machines
• U.S. Department of Labor
regulations
www.osha.gov
SAVE THESE INSTRUCTIONS!
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR
SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
Indicates an imminently hazardous situation which, if not avoided,
will
result in
death or serious injury
.
Indicates a potentially hazardous situation which, if not avoided,
could
result in
death or serious
injury.
Indicates a potentially hazardous situation which, if not avoided,
may
result in
minor or moderate
injury.
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided,
may
result in
property damage
.
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, al ways
wear NIOSH/OSHA approved, properly fitting face mask or respirator when using such tools.
IMPORTANT SAFETY INSTRUCTIONS .......................2
SAFETY GUIDELINES - DEFINITIONS ........................2
GENERAL SAFETY RULES ..........................................3
ADDITIONAL SPECIFIC SAFETY RULES ...................4
FUNCTIONAL DESCRIPTION .......................................6
CARTON CONTENTS ...................................................6
ASSEMBLY ....................................................................7
OPERATION ................................................................11
TROUBLESHOOTING .................................................13
MAINTENANCE ...........................................................13
SERVICE ......................................................................14
ACCESSORIES ...........................................................14
WARRANTY .................................................................15
FRANÇAIS ...................................................................16
ESPAÑOL ....................................................................29
