13
Adjustment of Container Funnel Inside Cylinder
The container funnel is located at the track rear and fastened onto the cylinder vertical wall, which
is used for receiving screws falling from the cylinder and guiding such screws onto the track.
1. Use the equipped hex-key wrench to unfasten the hex-key screws at the rear of the machine.
2. Adjust the V shape of the container funnel to align with the track center, and the distance
between the container funnel and the track shall be approximately 0.8 ~ 1.0mm.
Notes
a. The container funnel shall be kept at a clearance of 0.8~1.0mm from the track rear and shall be
aligned with the track center.
