19
pressing UP or DN key to adjust the count quantity (system default count value is 00,
and the setting range is 00 ~ 99). After 3S without pressing any keys or other key is
pressed within 3S, the system confirms the setting is complete and a buzzer is sounded
as an indication of the completion.
Under the standby or operation state,
press the SET key the fourth time, the system
enters alarm count quantity (tenth digit, single digit) setting
, LED display screen
flashes
, and the LED indicator SET is lit up, followed by pressing UP or
DN key to adjust the count quantity (system default count value is 00, and the setting
range is 00 ~ 99). After 3S without pressing any keys or other key is pressed within 3S,
the system confirms the setting is complete and a buzzer is sounded as an indication of
the completion.
1-3. Under the standby or operation state,
press the SET key the fifth time, the system
enters into the alarm buzzer setting
, LED display flashes and displays
,
and at this time., LED indicator SET is lit up; wherein 00 refers to the buzzer turn-on
method, 01 refers to the buzzer turn-off method, and press UP or DN key to toggle for
adjustment (system default method if 00). After 3S without pressing any keys or other
key is pressed within 3S, the system confirms the setting is complete and a buzzer is
sounded as an indication of the completion. Such loop repeats for operation.
1-4. Under the standby or operation state,
press the SET key the sixth time, the system
enters into the vibration delay setting
, LED display flashes and displays
, and at the same time, LED indicator SET is lit up; then, use UP or DN
key to adjust the delay time setting value (system default delay time value is 01 (1s),
and the setting range is 01 ~ 12s). After 3S without pressing any keys or other key is
pressed within 3S, the system confirms the setting is complete and a buzzer is sounded
as an indication of the completion.
1-5. Under the standby or operation state,
press the SET key the seventh time, the system
enters into the vibration intensity setting
, LED display flashes and displays
, and at the same time, LED indicator SET is lit up; then, use UP or DN
key to adjust the intensity setting value (system default intensity setting value is 01,
and the setting range is 01 ~ 10, 5v ~ 10v for a total of 10 levels, and 0.5v per level).
After 3S without pressing any keys or other key is pressed within 3S, the system
confirms the setting is complete and a buzzer is sounded as an indication of the
completion.
1-6. Under the standby or operation state,
press the SET key the eighth time, the system
enters cylinder delay setting
, LED display flashes and displays
, and at
the same time, LED indicator SET is lit up; then, use UP or DN key to adjust the delay
time setting value (system default delay time value is 01 (1s), and the setting range is
01 ~ 12s). After 3S without pressing any keys or other key is pressed within 3S, the
system confirms the setting is complete and a buzzer is sounded as an indication of the
completion.
1-7. Under the standby or operation state,
press the SET key the ninth time, the system
