16
Method of Use
Quantity of Screws Placed In
Before placing the screws, the power shall be switched off first. Remove the feeding tank top cover,
check whether there is any foreign object in the screws placed in, and place the screws into the
feeding tank. The screws are added onto the two left and right sides equally to location at
approximately 1 ~ 2mm from the lower edge of the track in front of the gate opening.
The quantity of screws is approximately 200 ~ 220cc in principle. Objects other than the screws
used this time are foreign objects, which shall be removed first in order to prevent impacts on the
normal function of the machine.
Screws of size ≤10mm
Screws of size ≤15mm
Screws of size ≤19mm
