11
8. Installation and connections
The instrument is set to work indoors.
For wall mounting, the instrument is fitted with a plate to be fixed to the wall. The instrument
is attached through a cavity, near the arrow.
As shown in the figure, 4 holes are needed at 90 mm horizontally and 110 mm vertically. The
holes have a 4,5 mm diameter.
In order to separate the plate from the instrument bottom, open the two front doors to access
the instrument terminal board. Unscrew the two screws shown in the following figure and pull
the instrument toward yourself.
Fix the plate to the wall using four screws. Lock the instrument in the cavity located at the top
and screw again the two screws inside the terminal board housing for final fastening.
Summary of Contents for HD2817T Series
Page 62: ...62...
