26
OUTPUT 1 - 2 - 3
Analog Output 1
Analog Output 2
Analog Output 3
Current/Voltage out
<UP> <DOWN> select
<ENTER> confirm
<ESC> exit/cancel
To configure your analog output parameters, e.g. the analog output 1, use the
arrows to
select it and press ENTER.
A screen with two items will appear:
OUTPUT 1
Mode
: T Temp.
Range values
<UP> <DOWN> select
<ENTER> confirm
<ESC> exit/cancel
Mode
It is the physical quantity associated to the analog output, and is shown on
corresponding line of the display. To change it, use the
arrows to select the
Mode
line and press ENTER: The
Output 1 - Mode
menu will open.
OUT 1 SOURCE
RH Rel. Humidity
AH Abs. Humidity
MR Mixing Ratio
Td Dew Point
*
T Temperature
Tw Wet bulb temp.
<ESC> exit/cancel
The current quantity is indicated by an asterisk (“
T Temperature
” in the example): to
change it, use the
arrows to select the new item and press ENTER. The asterisk
will indicate your new selection. Press ESC to return to the previous menu.
You can select the following per each of the three outputs:
•
RH Rel. humidity
,
•
AH Abs. humidity
,
•
MR Mixing Ratio
,
•
Td Dew Point
,
•
T Temperature,
•
Tw Wet bulb temperature
Range values
It allows setting the lower and upper limits of the physical quantity associated
to the analog output. Use the
arrows to select the
Range values
line and press
ENTER: the
Output 1 - ... Range
menu will open.
Summary of Contents for HD2817T Series
Page 62: ...62...
