Delta OHM HD2817T Series, Manual

Page: 28 / 64

28
•
The display mode setting screen will open. “ Numerical value” is the standard numeric
display. The other “ Graph ...” items are reserved to graphic display.
Select VIEW or ESC
Numerical Values
Graph RH Rel. Hum.
Graph AH Abs. Hum.
Graph SH Mix. Ratio
Graph Td Dew Point
* Graph T Temp.
Graph T wet bulb temperature
<ESC> exit
•
The current display is indicated by an asterisk: use the
 
arrows to select the new item
and press ENTER.
By selecting “
Numerical Values ” and pressing ENTER, you will return directly to standard
numeric display.
Otherwise, you will access the next screen to define the graph minimum and maximum
limits.
GRAPHS
SET RANGE VALUES
Graph T Temp.
set min: 0.0°C
set max: 100.0 °C
<ESC> exit
•
To change the minimum value, press ENTER to select the “ set min ” line and use the
 
arrows to set the desired value.
•
Press ENTER to go to the “ set max ” line. Use the
 
arrows to set the desired value.
•
Press MENU to exit and display the graph.
The graph has these characteristics:
•
The display width is 96 pixel: each pixel, as described above, represents the average
calculated on a certain number of measurements. This number depends on the set logging
interval.