Delta OHM HD2205.2, Manual

Page: 21 / 80

- - 21
U
SER
M
ANAGEMENT
The user must identify himself or herself by entering a user name and password: The registered user
name is shown in all performed operations: printing, logging, calibration...
The available users are:
administrator , user_1 , user_2 , user_3 and anonymous user . The different
users have different usage levels: The Administrator is enabled to use all of the instrument functions
and assigns the password to the other users. The three users and the anonymous can access only part
of the functions.
Settings
The user management options are stored in the “ LANGUAGE / USERS / PASSWORDS ” menu
item.
When the instrument comes out of the factory, the only user stored is the administrator. The pass-
word is “00000000”: The “
Create / Edit User Password ” function allows modification of the ad-
ministrator password.
To enable
user_1, user_2 and user_3 , you must assign a different password (not “00000000”), us-
ing the “ Create / Edit User Password ” function.
In order to do that:
1. Select the menu item “ Create / Edit User Password ”.
2. Select the user (e.g. User_1) using the arrows.
3. Type the old password (“00000000” in the new instrument), and confirm with ENTER.
4. Type the new password (not “00000000”), and confirm with ENTER.
5. Select “LANGUAGE / USERS / PASSWORDS” >> “ User Registration, current = Adminis-
trator ” using the arrows, and select the new user to which you have just assigned
a password.
6. Type the password, and confirm with ENTER.
Now User_1 is enabled and can use the instrument: The printed and stored information will show
“Operator = User_1”.
Note: the passwords beginning with 27 (27000000 to 27999999) are reserved and you cannot use
them.
Access modes
If you wish the instrument to request the user selection and relevant password upon turning on, set
“
User Exit Mode ” = Forget User . When you turn the instrument on you get all the users: Select the
user using the arrows, and type its password. Confirm by pressing ENTER. The
anonymous user does not need a password.
If you select “
Recall User ”, the instrument uses the previous user without requiring a password. In
this case, use the “ User Registration, current… ” menu item to change the user (see points 5 and 6
above).
Note: the access mode can be modified only by the administrator.