Delta OHM HD2205.2, Manual

Page: 46 / 80

- - 46
C
ONNECTION TO A
PC
The instruments are fitted with two ports for connecting the instrument to the PC:
ƒ RS232C serial port with null modem cable code 9CPRS232 . The cable has two sub D 9-
pole female connectors.
ƒ USB 2.0 port with the cable code CP22 . The cable has a USB type A connector for PC con-
nection and a USB type B connector for connection to the instrument.
The Bluetooth HD22BT module, directly installed by Delta Ohm, is also available. This module al-
lows wireless connection of the instrument to a PC fitted with a Bluetooth HD USB.KL1, to a Blue-
tooth
S’Print-BT printer, or to a PC with built-in Bluetooth interface.
The instrument are supplied with the DeltaLog11 software. The software manages the connection,
data transfer, graphic presentation, and printing operations of the captured or logged measurements.
The DeltaLog11 software is complete with "On-line Help" (also in PDF format) describing its
characteristics and functions.
The instruments are also compatible with the HyperTerminal communication program supplied
with the Windows operating systems (from Windows 98 to Windows XP).
C
ONNECTION TO THE
RS232C
SERIAL PORT
1. The measuring instrument has to be switched off.
2. Using the null-modem Delta Ohm 9CPRS232 cable, connect the measurement instrument to the
first free serial port (COM) of the PC.
3. Turn on the instrument and set the baud rate to 115200 (SETUP >> “SYSTEM PARAMETERS”
>> “
Selection of the serial transmission speed (Baud Rate) ” select 115200 using the arrows >>
confirm with ENTER). The parameter remains in the memory.
4. Launch the DeltaLog11 application and press CONNECT. Wait for the connection to occur and
follow the indications on the screen. For a description of the DeltaLog11 application, please refer
to its On-line Help.
C
ONNECTION TO THE
USB 2.0
PORT
The USB connection requires the installation of the drivers . They are contained in the Delta-
Log11 CD-Rom.
Proceed as follows:
1. Do not connect the instrument to the USB port until you are expressly requested to do it.
2. Insert the DeltaLog11 CD-Rom and select the " Install/Remove USB driver " item.
3. The application checks the presence of the drivers on the PC: the installation starts if they are
not present; if they are already installed, the drivers are removed by pressing the key.
4. The installation wizard prompts the software user license: to proceed, the software usage
terms must be accepted - click on YES .
5. On the next page the folder where the drivers will be installed is indicated: confirm without
modifying.
6. Complete the installation by clicking on Finish . Wait few seconds until the DeltaLog11 page
appears.