DELTA GROUP VIVOTEK CU9171 User Manual Download Page 39

Page: 39 / 411

VIVOTEK

User's Manual - 39

Configuration Area

Client Settings: Click this button to access the client setting page. For more information, please refer to

Client Settings on page 43.

Configuration: Click this button to access the configuration page of the Network Camera. It is suggested

that a password be applied to the Network Camera so that only the administrator can configure the

Network Camera. For more information, please refer to Configuration on page 48.

Language: Click this button to choose a language for the user interface. Language options are available

in: English, Deutsch, Español, Français, Italiano,

日本語

, Português,

簡体中文

, and

繁體中文

. Please

note that you can also change a language on the Configuration page; please refer to page 48.

Hide Button

You can click the hide button to hide or display the control panel.

Resize Buttons

Click the Auto button, the video cell will resize automatically to fit the monitor.

Click 100% is to display the original homepage size.

Click 50% is to resize the homepage to 50% of its original size.

Click 25% is to resize the homepage to 25% of its original size.

Live Video Window

■

The following window is displayed when the video mode is set to H.264 or H.265:

Video Title

: The video title can be configured. For more information, please refer to Video Settings on

page 62.

H.264 or H. 265 Protocol and Media Options: The transmission protocol and media options for H.264 or

H.265 video streaming. For further configuration, please refer to Client Settings on page 43.

Time

: Display the current time. For further configuration, please refer to Media > Image > Genral settings

on page 62.

Title and Time

: The video title and time can be stamped on the streaming video. For further configuration,

please refer to Media > Image > General settings on page 65.

Video 17:08:56 2018/03/25

Title and Time

2018/03/25 17:08:56

Time

Video (TPC-AV)

H.265/264 Protocol and Media Options

Video Title

x4.0

Zoom Indicator

Video Control Buttons

Summary of Contents for VIVOTEK CU9171



























































































































































































































































































































































































































Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands

DELTA GROUP VIVOTEK CU9171, User Manual

Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands