VIVOTEK
User's Manual - 339
© 2022 VIVOTEK INC. All Right Reserved
200
7.38.4.
VADP Event Settings
Group:
vadp_event
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ntrigger
0,<positive
integer>
6/7
Indicate the number of topics to be
transferred to event manager for
trigger.
triggerlist_i<0~(n-
1)>_topic
string[256]
6/6
Indicate the event notification with this
topic will be transferred to event
manager as trigger.
n is equal to ntrigger above.
7.39
Camera PTZ Control
Group:
camctrl
(capability_camctrl_ptztunnel > 0)
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
enableptztunnel
<boolean>
1/4
Enable PTZ tunnel for camera control.
Group:
camctrl_c<0~(n-1)>
for n channel products
(capability_ptzenabled > 0)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
panspeed
-5 ~ 5
1/4
Pan speed
tiltspeed
-5 ~ 5
1/4
Tilt speed
zoomspeed
-5 ~ 5
1/4
Zoom speed
focusspeed
-5 ~ 5
1/4
Auto focus speed
patrolseq
string[120]
1/4
(For external device)
The indexes of patrol points, separated
by “,”
patroldwelling
string[160]
1/4
(For external device)
The dwelling time of each patrol point,
separated by “,”
* only available when
capability_camctrl_c0_rs485=2
preset_i<0~(k-1)>_name string[40]
1/4
Name of the preset location.
preset_i<0~(k-1)>_
dwelling
0 ~ 999
1/4
The dwelling time of each preset
location
* only available when
capability_camctrl_c0_rs485=2
uart
0 ~ "
capability_nuar
t"-1
1/4
Select corresponding uart
(capability_nuart>0).
* only available when
© 2022 VIVOTEK INC. All Right Reserved
201
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
capability_camctrl_c0_rs485=2
cameraid
0~255
1/4
Camera ID controlling external PTZ
camera.
isptz
0 ~ 2
1/4
0: disable PTZ commands.
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
* only available when
capability_camctrl_c0_rs485=2
disablemdonptz
<boolean>
1/4
Disable motion detection on PTZ
operation.
7.40
Camera PTZ Control (IZ Series)
Group:
camctrl_c<0~(n-1)>
for n channel products
(capability_camctrl_c0_zoommodule = 1 and
capability_camctrl_c0_buildinpt = 0)
n denotes the value of "capability_nvideoin" and k denotes the value of "capability_npreset"
NAME
VALUE
SECURITY
(get/set)
DESCRIPTION
ccdtype
string[16]
6/7
(Internal used, read only)
motortype
string[16]
6/7
(Internal used, read only)
cameraid
0 ~ 255
1/4
Camera ID controlling external PTZ
camera.
Note:
Please set your speed dome to the
appropriate baud rate, and Camera ID,
e.g. 2400bps, camera ID 1,2,3,,,,etc.
All Camera IDs on the same controlling
system (NVR or rs485 keyboard) have to
be distinct.
Therefore, once you send a controlling
signal, each camera will only accept the
inputs with the corresponding ID.
panspeed
-5 ~ 5
1/4
Pan speed
tiltspeed
-5 ~ 5
1/4
Tilt speed
zoomspeed
-5 ~ 5
1/4
Zoom speed
autospeed
-5 ~ 5
1/4
Auto pan speed
focusspeed
-5 ~ 5
1/4
Auto focus speed
focusmode
auto,onetimeau
to,spotlight,ma
nual
* Available
1/4
Indicate the focus control mode.
