DELTA GROUP VIVOTEK CU9171 User Manual Download Page 96

Page: 96 / 411

VIVOTEK

96 - User's Manual

Authentication: Depending on your network security requirements, the Network Camera provides

three types of security settings for streaming via RTSP protocol: disable, basic, and digest.

basic

authentication is selected, the password is sent in plain text format, but there can be

potential risks of it being intercepted. If

digest

authentication is selected, user credentials are

encrypted using MD5 algorithm, thus providing better protection against unauthorized access.

The availability of the RTSP streaming for the three authentication modes is listed below:

Access name for stream 1 ~ 3: This Network camera supports multiple streams simultaneously.

The access name is used to differentiate the streaming source.

If you want to use an

RTSP player

to access the Network Camera, you have to set the video mode

H.264 or H.265

and use the following RTSP URL command to request transmission of the

streaming data.

rtsp://<ip address>:<rtsp port>/<access name for stream 1 to 3>

For example, when the access name for

stream 1

is set to

live1s1.sdp

1. Launch an RTSP player.

2. Choose File > Open URL. A URL dialog box will pop up.

3. Type the above URL command in the text box.

4. The live video will be displayed in your player as shown below.

RTSP port /RTP port for video, audio/ RTCP port for video, audio

■ RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By default, the

port number is set to 554.

■ The RTP (Real-time Transport Protocol) is used to deliver video and audio data to the clients. By

default, the RTP port for video is set to 5556.

■ The RTCP (Real-time Transport Control Protocol) allows the Network Camera to transmit the

data by monitoring the Internet traffic volume. By default, the RTCP port for video is set to 5557.

The ports can be changed to values between 1025 and 65535. The RTP port must be an even

number and the RTCP port is the RTP port number plus one, and thus is always an odd number.

When the RTP port changes, the RTCP port will change accordingly.

If the RTP ports are incorrectly assigned, the following warning message will be displayed:

VLC

Disable

Basic

Digest

rtsp://192.168.5.151:554/live1s1.sdp

Summary of Contents for VIVOTEK CU9171



























































































































































































































































































































































































































Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands

DELTA GROUP VIVOTEK CU9171, User Manual

Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands