DELTA GROUP VIVOTEK CU9171 User Manual Download Page 365

Page: 365 / 411

VIVOTEK

User's Manual - 365

226

8.8

ePTZ Recall

(capability_eptz > 0 and capability_fisheye = 0)

Note:

This request requires camctrl privileges.

Method: GET/POST

Syntax:
http://<

servername

>/cgi-bin/camctrl/eRecall.cgi?channel=<value>&stream=<value>&

recall=<value>[&return=

<return page>

]

PARAMETER

VALUE

DESCRIPTION

channel

<0~(n-1)>

Channel of the video source.

stream

<0~(m-1)>

Stream.

recall

Text string less than

40 characters

One of the present positions to recall.

return

Redirect to the page <return page> after the parameter is

assigned. The <return page> should be the relative path

according to the root of camera. If you omit this

parameter, it will redirect to an empty page.

* If the <return page> is invalid path, it will ignore this

parameter.

8.9

ePTZ Preset Locations

(capability_eptz > 0 and

capability_fisheye = 0)

Note:

This request requires Operator privileges.

Method:

GET/POST

Syntax:
http://<

servername

>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>

[&addpos=<value>][&delpos=<value>][&return=

<return page>

]

PARAMETER

VALUE

DESCRIPTION

channel

<0~(n-1)>

Channel of the video source.

stream

<0~(m-1)>

Stream.

addpos

<Text string less than

40 characters>

Add one preset location to the preset list.

227

PARAMETER

VALUE

DESCRIPTION

delpos

<Text string less than

40 characters>

Delete preset location from the preset list.

return

Redirect to the page <return page> after the parameter is

assigned. The <return page> should be the relative path

according to the root of camera. If you omit this

parameter, it will redirect to an empty page.

* If the <return page> is invalid path, it will ignore this

parameter.

8.10

IP Filtering for ONVIF

Syntax:

http://<

servername

>/cgi-bin/admin/ipfilter.cgi?type[=<value>]

http://<

servername

>/cgi-

bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=

<ipaddress>

[&index=<value>][&return=<

return

page

http://<

servername

>/cgi-

bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<

return page

PARAMETER

VALUE

DESCRIPTION

type

NULL

Get IP filter type

allow, deny

Set IP filter type

method

addv4

Add IPv4 address into access list.

addv6

Add IPv6 address into access list.

delv4

Delete IPv4 address from access list.

delv6

Delete IPv6 address from access list.

Single address: <IP address>

Network address: <IP address / network mask>

Range address:<start IP address - end IP address>

index

<value>

The start position to add or to delete.

8.11

UART HTTP Tunnel Channel

(capability_nuart > 0)

Note:

This request requires Operator privileges.

Method:

GET and POST

Syntax:
http://<

servername

>/cgi-bin/operator/uartchannel.cgi?[channel=<value>]

-------------------------------------------------------------------------

GET /cgi-bin/operator/uartchannel.cgi?[channel=<value>]

Summary of Contents for VIVOTEK CU9171



























































































































































































































































































































































































































Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands

DELTA GROUP VIVOTEK CU9171, User Manual

Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands