DELTA GROUP VIVOTEK CU9171 User Manual Download Page 260

Page: 260 / 411

VIVOTEK

260 - User's Manual

122

NAME

VALUE

SECURITY

(get/set)

DESCRIPTION

The format is "Affect API

name":"Policy":"Description"

"Policy" can be categorized into

following groups:

- (disabled) : UI turns grey and users

can't select it.

- (unchanged) : UI keeps the status as

before and user can't change it.

- (hidden) : UI is hidden.

- (fixed) : UI is fixed to one selection or

value.

- (ranged) : UI is fixed to multiple

selections or values.

- (enabled) : UI is checked.

- (notsupport) : the affected function

is not available.

"Affect API name" can be described in

hierarchy, such as

"exposurewin.mode.blc:disabled:"

which means blc exposure window is

disabled. API name can be one word

as well, such as

"exposurelevel:fixed:6" which means

exposurelevel is fixed to level 6.

"Description" can be a nonnegative

integer or string or NULL.

For example:

"maxframerate: fixed:15" which

means the max frame rate is 15fps

when acoustic echo cancellation

function is enabled.

"-" means no feature is affected.

* Only available when

"capability_audio_aec" is "1".

* We support this parameter when

the version number (httpversion) is

equal or greater than 0306b.

audio_mic

<Not support

anymore>

0/7

Indicate whether to support built-in

microphone input.

* Not support this parameter

anymore when the version number

(httpversion) is equal or greater than

0301a.

* We replace "audio_mic" with

"audio_intmic".

Summary of Contents for VIVOTEK CU9171



























































































































































































































































































































































































































Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands

DELTA GROUP VIVOTEK CU9171, User Manual

Search results

Summary of Contents for VIVOTEK CU9171

Reviews:

Related manuals for VIVOTEK CU9171

Brands by name

Popular brands