DELTA DORE TTGSM TYXAL+, Installation Manual

Page: 72 / 232

73 72
11.2 TTGSM TYXAL+
Button/LED
Press the button on the
front panel to view the
status of your telephone
line.
LED status Description
Flashing red * No PSTN line
Green on
and steady * PSTN line present
Flashing
green Call in progress
Off Normal operation,
incoming and outgoing calls are possible.
LED status
with mains power LED status
without mains
power Description
Flashing
red Off No GSM reception
Flashing
green/orange Off Weak GSM reception
Green
Steady Off Good GSM reception
Green
flashing Off Call in progress
(*) The LED remains on:
- for 5 minutes after switching on
- for 1 minute when pressing button T1.
If there is no mains power, the LED remains on for:
- 5 minutes after switching on
- the transmission of an event
- 1 minute when pressing button T1
- 5 minutes after a mains power failure
11.1 TTRTC TYXAL+
If there is no mains power, the
TTGSM TYXAL+ continues to
send the alarms but cannot be
controlled remotely.
11. Telephone line LED status 12. Battery replacement
The wear of the transmitter battery is reported:
• In alarm system mode:
By a message on the CLT 8000 TYXAL+ keypad. The alarm control unit beeps each time the system
is activated or deactivated, (or “battery defect” with the voice synthesis system (requires the auto
attendant to be enabled, see CLT 8000 TYXAL+ guide).
• In autonomous mode:
By a welcome message during an incoming or outgoing call caused by a defect.
The telephone transmitter permanently checks the telephone line.
For a telephone line defect, this symbol
is displayed on the touch screen keypad. Dial your access code to
discover the details of the defects.
25/11/15 12:48
Info Settings
OFF
My house
25/11/15 12:48
Info Settings
OFF
My house