DELTA DORE TTGSM TYXAL+, Installation Manual

Page: 55 / 232

55
EN
54
6. Operation with a CS 8000 TYXAL+ alarm control unit
6.1 Associate the transmitter with the alarm control unit.
Switch the alarm control unit to
maintenance mode (see guide for CS 8000
TYXAL+ alarm control unit § Maintenance
mode)
• Before switching the alarm control unit to
maintenance mode, the monitoring must be
deactivated (OFF).
• The alarm control unit can only be switched
to maintenance mode from a product already
associated.
• The CS 8000 TYXAL+ alarm control unit must
be associated with a CLT 8000 TYXAL+ touch
screen keypad.
On the CLT 8000 TYXAL+ touch screen keypad:
Ê
Enter the installer code, press Settings,
then select the menu: Installation > Products
Ë
Briefly press the T1 button of the transmitter.
The transmitter emits a beep when the T1 button is pressed,
then a second beep to confirm the association.
Î
The alarm control unit confirms the association with a beep.
The associated product is displayed on the screen (e.g. TTRTC TYXAL+).
Í
You can now configure and personalise the transmitter
from the CLT 8000 TYXAL+ touch screen keypad.
CS 8000 TYXAL+ CLT 8000 TYXAL+
Maintenance
mode
Download
Programming
Access codes
Software version
Settings
Clock
Languages
Ok Return
Installation
Installation
Zones
Door chime
Test
Initialisation
Ok
Products
Return
Access code
XXXXX X
Ok
SOS
2 3 1 25/11/14 12:48
SOS Settings
OFF
Enter your code
Info Settings
My home
OFF
25/11/14 12:48
The table opposite shows the function that can
be personalised on the TTRTC TYXAL+ and
TTGSM TYXAL+ transmitters from the CLT 8000
TYXAL+ touch screen keypad.
(Menu: Installation > Products > Configure).
(1): Example: a child comes home and deactivates the
system via the remote control or badge reader, the GSM
telephone
transmitter sends an SMS to the parents.
(2): With a GSM telephone transmitter, you can select the call
numbers that will receive a warning by SMS if an event
occurs.
TTRTC
TYXAL+
transmitter
TTGSM
TYXAL+
transmitter
Name the products
4 4
Tamper alarm
4 4
Call numbers
4 4
Remote monitoring
4 4
Incoming calls
4
-
SIM card -
4
SMS alert to
relatives (1)
-
4
Voice/SMS
distribution option (2)
-
4
Auto attendant
4 4
Alarm control unit
monitoring
4 4
7. Personalising the transmitter
5.1 TTGSM TYXAL+ SIM card
Your installation does not have
a touch screen keypad
(CLT 8000 TYXAL+)
The switch to maintenance mode
automatically and briefly activates the
indoor siren of the alarm control unit as
well as a transmitter call cycle.
Use the touch screen interface to configure
your transmitter even more easily.