DELTA DORE TTGSM TYXAL+, Installation Manual

Page: 59 / 232

59
EN
58
7.5 Incoming calls
(only for the
TTRTC TYXAL+ transmitter)
Ê
Enter the installer code (123456, by default) and confirm with OK.
Ë
Press Settings, then select the menu:
Installation > Products > Configure
Ì
Press the button of the transmitter or select it from the list of products by clicking on
"Browse".
Í
Select the menu "Incoming calls", then:
Î
Number of rings: Specify the number of rings
required before the transmitter picks up the line.
Dual call: You can activate or deactivate the
"rapid" line pick up method.
Rapid line pick up:
- Call the transmitter,
- After 2 rings, hang up,
- Wait for 10 seconds, then call again,
- The transmitter picks up immediately.
Number of rings
Ok
0
Return
Dual call
Activate >
Ok Return
Incoming calls
Ok
Return
Dual call
Number of rings
4
5
PSTN transmitter
Remote monitoring
Ok Return
Call numbers
Incoming calls
Dual call
< Deactivate
Ok Return
4
5
GSM transmitter
Remote monitoring
Auto attendant
Alarm control unit monitoring
Ok Return
SMS alert to relatives
SIM card
SIM card
Enter PUK code
Ok
Return
Enter PIN code
Enter PIN code
Ok
0
Return
Enter PUK code
Ok
0
Return
7.6 SIM card
(only for the TTGSM TYXAL+ transmitter)
Ê
Enter the installer code (123456, by default) and confirm with OK.
Ë
Press Settings, then select the menu:
Installation > Products > Configure
Ì
Press the button of the transmitter or select it from the
list of products by clicking on "Browse".
Í
Select the "SIM card" menu.
Î
Enter the parameters of the SIM card:
PIN code
PUK code
This menu is used to configure the settings for the remote monitoring. A detailed description of the remote
monitoring settings is available in § Remote monitoring appendix
4
5
PSTN transmitter
Incoming calls
Ok Return
Auto attendant
Identifier
Cyclic test
Remote monitoring
Ok Return
Protocol selection
Main number
Emergency number
Main number
Ok
0
Return
Emergency number
Ok
0
Return
Identifier
Ok
0
Return
Programming
loop?
Yes No
Loop list
Ok
Tamper alarm
Technical defect
Return
Intruder alarm
Protocol selection
No >
Return Ok
Protocol selection
No >
Return Ok
Remote monitoring
Loop number
Ok
0
Return
Cyclic test
< 1/2 hour
Ok Return
Cyclic test
Hourly >
Return Ok
Hourly
Ok Return
12 .00
Number of 1/2 hour
Ok
0
Return
This menu is used to determine the number of rings before the line is taken by the transmitter
(only for the TTRTC TYXAL+).
Another method known as "Dual call", enabling rapid line pick up, can be enabled or disabled.
This menu is used to enter the PIN code of the SIM card to activate it.
7. Personalising the transmitter