Delphi 9330-150-A01, Installation Instructions Manual

Page: 4 / 16

Model 9330-150-A01 Installation Instructions Page 4 of 16
Document: INS-9330-A01, Rev. C
Do not copy or distribute without written permission. Unpublished Work  2022 Delphi Display Systems, Inc. All rights reserved.
Printed copies are Uncontrolled unless clearly marked as a Controlled document. User is responsible for verifying document is the current revision.
1 Introduction
This document describes the installation procedures for the Endura
®
15X Model 9330-150-A01 Order
Confirmation System (OCS) display, including instructions on the connections, all cabling and any additional
hardware required for installation.
2 Warnings
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
警告使用者：此為甲類資訊技術設備，於居住環境中使用時，可能會造成射頻擾動，在此種情況下，使用者會被要
求採取某些適當的對策。

All installation, service and maintenance must be performed by qualified personnel.

Turn off Power before installation or servicing the Order Confirmation System Display.

All installation, service, and maintenance should be performed in compliance with applicable
local codes.

Always follow OSHA and local safety codes.