Note:
When the DHCP function is enabled, users must install a DHCP server on
the network; otherwise, the device server will assign a default static IP address
(i.e. 192.168.0.3) if the DHCP server couldn’t be found. If the DHCP function is
disabled, RS-232 to Ethernet Converter firmware code will assign a default static
IP address (i.e. 192.168.0.3). Of course, users can also change the static IP
address via the AXR2E Configuration Utility or the Remote Configuration Web
Server.
Step 4: Power on the device server to startup the system.
3.2.2 Pair Connection Demo System
The testing environment for pair connection function is shown in below figure.
Figure 11. Testing environment for pair connection function
