Note:
Regarding the more detailed procedures, you can refer to Chapter 5 and
Chapter 6 for more details.
Figure 9. Device Server Demo System Illustration
The demo application allows both Hyper Terminal programs on separate PC communicating
via a LAN environment. The input data on the console of HyperTerminal on PC1 will be
transmitted to the HyperTerminal on PC2, and vice versa.
The following are the detailed device server setup procedures,
Step 1: Connect one end of RS-232 cable in PC2’s COM port and another end into device
server’s UART-2 port.
Step 2: Connect the device server to the Ethernet port of PC1 via a RJ-45 cable.
Step 3: Power on PC2 and open a HyperTerminal connection with appropriate serial port
parameters setting.
Figure 10. Target Serial Device COM
Port Setting
