Replacing the Hard Drive
1.
Place the new drive in the hard drive carrier from which you removed the original hard drive.
2.
Slide the drive into the bay until it is fully seated.
3.
Replace and tighten the four M3 x 3-mm hard-drive screws.
4.
If you have installed a replacement hard drive, reinstall the Microsoft
®
Windows
®
operating system and the drivers for the new hard drive. For
instructions, see "Restoring Your Operating System" and "Reinstalling Drivers and Utilities" in the
Owner's Manual.
Instructions for alternative solutions
are available at
support.dell.com/pcrt
.
Returning a Hard Drive to Dell
Return your old hard drive to Dell in its original or comparable foam packaging. Otherwise, the hard drive may be damaged in transit.
Back to Contents Page
NOTICE:
Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.
1
hard drive
2
foam packaging
Summary of Contents for XPS M1210
Page 43: ...Back to Contents Page ...