5.
Replace the communications card cover.
6.
If the WLAN card you just replaced is being installed in this computer for the first time, see "Using Networks" and "Drivers" in the Owner's Manual for
your computer for instructions on connecting to a wireless network and installing drivers.
Mobile Broadband (WWAN) Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Turn the computer upside down and loosen the captive screw to remove the communications card cover.
3.
If a Mobile Broadband card is not already installed, go to
step 4
. If you are replacing a Mobile Broadband card, remove the existing card:
a.
Disconnect the antenna cables from the Mobile Broadband card.
1
antenna cable connectors (2)
2
triangles (2)
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
CAUTION:
Only products approved for use in your portable computer may be installed.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
NOTE:
Mobile Broadband cards are also known as WWAN cards.
Summary of Contents for XPS M1210
Page 43: ...Back to Contents Page ...
