Back to Contents Page
Camera (Optional)
Dell™ XPS™ M1210 Service Manual
Removing the Camera
Replacing the Camera
Removing the Camera
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Remove the hinge cover (see
Removing the Hinge Cover
).
3.
Remove the keyboard (see
Keyboard
).
4.
Remove the display assembly (see
Removing the Display Assembly
).
5.
Remove the display bezel (see
Removing the Display Bezel
).
6.
Remove the display panel (see
Removing the Display Panel
).
7.
Remove the two M2 x 3-mm screws that attach the camera to the display back cover.
8.
Detach the camera cable from the display back cover by lifting the tape that secures it to the cover.
Replacing the Camera
1.
With the camera lens facing up, insert the tab at the top-left of the camera into the detent at the bottom-left edge of the camera bezel.
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
NOTE:
The camera is an optional feature.
1
tape
3
camera
2
M2 x 3-mm screws (2)
4
display back cover
Summary of Contents for XPS M1210
Page 43: ...Back to Contents Page ...
