Back to Contents Page
Display
Dell™ XPS™ M1210 Service Manual
Display Assembly
Display Bezel
Display Panel
Display-Panel Brackets
Display Assembly
Removing the Display Assembly
1.
Follow the instructions in
Before Working Inside Your Computer
.
2.
Turn the computer upside down and loosen the captive screw on the communications card cover.
3.
Disconnect the antenna cables from the Mini-Card(s), if applicable.
4.
Turn the computer top-side up.
5.
Remove the hinge cover (see
Removing the Hinge Cover
).
6.
Remove the keyboard (see
Keyboard
).
CAUTION:
Before you begin the following procedure, follow the safety instructions in the
Product Information Guide
.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
Before Working Inside Your Computer
) before working inside the
computer.
NOTE:
You must detach the Mini-Card (WLAN and/or Mobile Broadband) antenna cables (see
step 3
) before you can remove the display assembly. If a
Mini-Card is installed, disconnect the antenna cables from the card(s). If one is not installed, detach the antenna cables from their secured location.
Summary of Contents for XPS M1210
Page 43: ...Back to Contents Page ...
