![Dell Wyse 5470 Service Manual Download Page 66](http://html.mh-extra.com/html/dell/wyse-5470/wyse-5470_service-manual_85666066.webp)
Option
Description
– UEFI: Hard Drive, Partition 4
– Onboard NIC(IPV4)
– Onboard NIC(IPV6)
•
Boot List Option: You can add a boot option, delete an existing
boot option, and view the boot options.
UEFI boot path security
This option enables you to control the system prompt of
How to
enter the Admin Password
(if set) when you boot a UEFI boot
path from the F12 boot menu.
The options include:
•
Always, except internal hard drive ( default)
•
Always
•
Never
Date/Time
This option enables you to change the system date and time.
System configuration
Table 4. System Configuration
Option
Description
Integrated NIC
Allows you to configure the integrated network controller.
Click one of the following options:
Enable UEFI Network Stack
If enabled, UEFI networking protocols are installed, allowing pre-
operating system and early operating system networking features
to use enabled NICs. This maybe used without PXE turned on.
Integrated NIC
•
Disabled
•
Enabled
•
Enabled w/PXE
—Default
SATA Operation
Allows you to configure the operating mode of the integrated SATA
hard drive controller.
Click one of the following options:
•
Disabled
•
AHCI
•
RAID
—Default
NOTE:
SATA is configured to support RAID
mode.
Drives
Allows you to enable or disable various drives on board.
The options are:
•
SATA-0
•
M.2 PCIe SSD-0/SATA-2
66
System setup
Summary of Contents for Wyse 5470
